# Report Save to ASCII...

**URL:** <https://www.dynamicsuser.net/t/report-save-to-ascii/15483>\
**Category:** Developer Forum\
**Created:** [May 9, 2006, 11:08am UTC](https://www.dynamicsuser.net/t/report-save-to-ascii/15483 "2006-05-09T11:08:30Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Axa\_Sers](https://avatars.discourse-cdn.com/v4/letter/a/e8c25b/32.png) [@Axa\_Sers](https://www.dynamicsuser.net/u/Axa_Sers)\
**Post date:** [May 9, 2006, 11:08am UTC](https://www.dynamicsuser.net/t/report-save-to-ascii/15483/1 "2006-05-09T11:08:30Z")

</div>

Hi @ALL In the Report printersettings when i choose save to File (ASCII) than it generates an .txt file but it doesnt look like the Report!! The CR–\>HEX(0D) ist replaced by TAB–\>Hex(09) Iam searching for the Method or Class that generates the ASCII file but coulnd find it… Maybe someone could help? Thx

---

<div class="post-metadata">

**Author:** ![Mugur](https://avatars.discourse-cdn.com/v4/letter/m/3e96dc/32.png) [@Mugur](https://www.dynamicsuser.net/u/Mugur)\
**Post date:** [May 10, 2006, 6:44am UTC](https://www.dynamicsuser.net/t/report-save-to-ascii/15483/2 "2006-05-10T06:44:41Z")

</div>

Hi, You may need to check the SysReportRun class. I didn’t look in detail but this might help. Try debuging starting with the run() method.

---

<div class="post-metadata">

**Author:** ![Axa\_Sers](https://avatars.discourse-cdn.com/v4/letter/a/e8c25b/32.png) [@Axa\_Sers](https://www.dynamicsuser.net/u/Axa_Sers)\
**Post date:** [May 10, 2006, 7:12am UTC](https://www.dynamicsuser.net/t/report-save-to-ascii/15483/3 "2006-05-10T07:12:52Z")

</div>

Thank you for your reply! I have followed the debugger but i didnt find anything… It didnt jump to a Method or Class that writes the File… [:(!]

---

<div class="post-metadata">

**Author:** ![Axa\_Sers](https://avatars.discourse-cdn.com/v4/letter/a/e8c25b/32.png) [@Axa\_Sers](https://www.dynamicsuser.net/u/Axa_Sers)\
**Post date:** [May 10, 2006, 7:37am UTC](https://www.dynamicsuser.net/t/report-save-to-ascii/15483/4 "2006-05-10T07:37:58Z")

</div>

In the Report print() Method super jumps to ---------------------- public ReportViewer createReportViewer(PrintJobHeader \_jobsCursor, PrintJobPages \_pagesCursor, ReportRun \_reportRun=null) { ReportViewer ret; if (BMMainControl::inAction()) ret = new BMReportViewer(\_jobsCursor, \_pagesCursor); else ret = super(\_jobsCursor, \_pagesCursor, \_reportRun); return ret; } ---------------------------- than in the ReportViewer method its goes to … else ret = super(\_jobsCursor, \_pagesCursor, \_reportRun); … after that the txt file is generated! An the debugger doesnt jump into… so i cant see the method that generate the .txt file… [V]