# production orders status

**URL:** <https://www.dynamicsuser.net/t/production-orders-status/53655>\
**Category:** Technical Forum\
**Created:** [July 2, 2014, 10:44am UTC](https://www.dynamicsuser.net/t/production-orders-status/53655 "2014-07-02T10:44:11Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mrhack79](https://avatars.discourse-cdn.com/v4/letter/m/b5a626/32.png) [@Mrhack79](https://www.dynamicsuser.net/u/Mrhack79)\
**Post date:** [July 2, 2014, 10:44am UTC](https://www.dynamicsuser.net/t/production-orders-status/53655/1 "2014-07-02T10:44:11Z")

</div>

Dears ,

I have an issue in the production module which is as below :

today I 've opened the ax2012 -----\> all production orders then I found that the status of all the production orders have been changed from report as finished to the status started I do not know what’s is the problem ,

looking for some help on such situation .

regards

---

<div class="post-metadata">

**Author:** ![AdamRoue](https://avatars.discourse-cdn.com/v4/letter/a/c37758/32.png) [@AdamRoue](https://www.dynamicsuser.net/u/AdamRoue)\
**Post date:** [July 3, 2014, 7:36am UTC](https://www.dynamicsuser.net/t/production-orders-status/53655/2 "2014-07-03T07:36:12Z")

</div>

So someone went in and changed the status - what they will have done is gone to one order and chosen to reset, then decided to press the select button and cleared the single order filter, pressed OK and then all orders would have been returned, they then pressed OK again.

---

<div class="post-metadata">

**Author:** ![Mrhack79](https://avatars.discourse-cdn.com/v4/letter/m/b5a626/32.png) [@Mrhack79](https://www.dynamicsuser.net/u/Mrhack79)\
**Post date:** [July 3, 2014, 8:24am UTC](https://www.dynamicsuser.net/t/production-orders-status/53655/3 "2014-07-03T08:24:20Z")

</div>

yes this is what happened exactly ,

but i need to revers this action cause all production orders are finished .

---

<div class="post-metadata">

**Author:** ![AdamRoue](https://avatars.discourse-cdn.com/v4/letter/a/c37758/32.png) [@AdamRoue](https://www.dynamicsuser.net/u/AdamRoue)\
**Post date:** [July 3, 2014, 8:33am UTC](https://www.dynamicsuser.net/t/production-orders-status/53655/4 "2014-07-03T08:33:26Z")

</div>

You cannot reverse it, now you need to set each one back to RAF, and you will need to do this individually and re-report all posted journals etc.