# Navision and TCP/IP

**URL:** <https://www.dynamicsuser.net/t/navision-and-tcp-ip/15544>\
**Category:** User Forum\
**Created:** [April 11, 2001, 6:15pm UTC](https://www.dynamicsuser.net/t/navision-and-tcp-ip/15544 "2001-04-11T18:15:08Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![steen](https://avatars.discourse-cdn.com/v4/letter/s/c4cdca/32.png) [@steen](https://www.dynamicsuser.net/u/steen)\
**Post date:** [April 11, 2001, 6:15pm UTC](https://www.dynamicsuser.net/t/navision-and-tcp-ip/15544/1 "2001-04-11T18:15:08Z")

</div>

Just wanted to ask if anyone could give me a little fast instruction on how to run navision as TCP/IP instead of NetB. I have Navision 3.56a, and mostly need the “server” line, and “client” line, and what to write in “hosts” something like: Server: servern.exe nettype=… ? Client: navin.exe … Any help is appreciated, as I am going to change a system tomorrow

---

<div class="post-metadata">

**Author:** ![FormerMember](https://avatars.discourse-cdn.com/v4/letter/f/74df32/32.png) [@FormerMember](https://www.dynamicsuser.net/u/FormerMember)\
**Post date:** [May 10, 2001, 1:06pm UTC](https://www.dynamicsuser.net/t/navision-and-tcp-ip/15544/2 "2001-05-10T13:06:52Z")

</div>

Hi, did you recieve any answers? These parameters are not that difficult. Just answer me. I’ll try to help you. Marc

---

<div class="post-metadata">

**Author:** ![Kerberos](https://avatars.discourse-cdn.com/v4/letter/k/b2d939/32.png) [@Kerberos](https://www.dynamicsuser.net/u/Kerberos)\
**Post date:** [May 13, 2001, 8:05pm UTC](https://www.dynamicsuser.net/t/navision-and-tcp-ip/15544/3 "2001-05-13T20:05:13Z")

</div>

Mail me and I will help you