# Debugger issue: codeunit 1535

**URL:** <https://www.dynamicsuser.net/t/debugger-issue-codeunit-1535/60563>\
**Category:** Developers Forum\
**Created:** [April 28, 2016, 8:52pm UTC](https://www.dynamicsuser.net/t/debugger-issue-codeunit-1535/60563 "2016-04-28T20:52:14Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![OnlyRodd](https://avatars.discourse-cdn.com/v4/letter/o/d9b06d/32.png) [@OnlyRodd](https://www.dynamicsuser.net/u/OnlyRodd)\
**Post date:** [April 28, 2016, 8:52pm UTC](https://www.dynamicsuser.net/t/debugger-issue-codeunit-1535/60563/1 "2016-04-28T20:52:14Z")

</div>

Good morning , I have an issue when I m running the debugger .

I set up the breakpoint onRun fonction on the codeunite1535 .

I switched user (Vincent) .

I launched approval request with a user Vincent .

I m getting no message but I excuted

I switched user Bruno and I dont have any approval request .

The reason why I need to use the debugger because have event response .

The reponse inactive .

My question is there a reason why debugger may not work or I need to set up a setting to make it work ?

And why my response may be inactive ?

Any suggestion ?

The function I wish to investigate : ApprovalAllapprovealrequest and sendapprovalrequestforapproval

---

<div class="post-metadata">

**Author:** ![admin1](https://sea1.discourse-cdn.com/flex023/user_avatar/www.dynamicsuser.net/admin1/32/7476_2.png) [@admin1](https://www.dynamicsuser.net/u/admin1)\
**Post date:** [April 28, 2016, 8:58pm UTC](https://www.dynamicsuser.net/t/debugger-issue-codeunit-1535/60563/2 "2016-04-28T20:58:46Z")

</div>

Hi Rodd,  
Is this question related to the other with the same subject you posted earlier today?

---

<div class="post-metadata">

**Author:** ![mahesh\_mahi](https://avatars.discourse-cdn.com/v4/letter/m/2bfe46/32.png) [@mahesh\_mahi](https://www.dynamicsuser.net/u/mahesh_mahi)\
**Post date:** [April 29, 2016, 7:53am UTC](https://www.dynamicsuser.net/t/debugger-issue-codeunit-1535/60563/3 "2016-04-29T07:53:52Z")

</div>

Hi Rodd,

Did you activate debugger?  
if not first activate debugger(Shift+Ctrl+F11) and select which user running the system and press the debug action then only it will start Debugging.

Thank You  
Mahesh U

---

<div class="post-metadata">

**Author:** ![OnlyRodd](https://avatars.discourse-cdn.com/v4/letter/o/d9b06d/32.png) [@OnlyRodd](https://www.dynamicsuser.net/u/OnlyRodd)\
**Post date:** [May 2, 2016, 4:10pm UTC](https://www.dynamicsuser.net/t/debugger-issue-codeunit-1535/60563/4 "2016-05-02T16:10:34Z")

</div>

I did that .  
I select the user and press the debug button .

When I llok the debugger windoe .  
It there a message waiting for break,  
But I aalready put a some breakpoint on the code unit 1535 .